
Fabric mill & dyeing house
From greigeto glorious.
Forty-one fabric qualities, supplied two ways: raw greige for your own dye house, or piece-dyed and finished to your shade. Same loom, same inspection, your choice of where the process stops.
Fox Georgette/Dyed
Who we are
A mill thatstops whereyou want it to.
Most suppliers sell you one half of the process. We produce the cloth, inspect it in greige, and then either hand it over as it is or take it through dyeing and finishing to the shade you signed off. The decision is yours, quality by quality.
Raw · Cotton Slub
Dyed · Gold Organza0
Fabric qualities
Live in the catalogue
0
States supplied
Raw greige and dyed
0+
Shades matched
TODO: confirm
0h
Lab-dip turnaround
TODO: confirm
Start here
Raw, or dyed?
The same 41 qualities, two very different conversations. Pick the one that matches how you buy — you can cross over at any point.

Raw
Loom-state cloth, inspected and rolled, ready for your own dyeing, printing or finishing programme.
- Loom-state, undyed, unfinished
- Inspected and measured before dispatch
- Construction details supplied

Dyed
Piece-dyed to your shade, finished for hand and fall, and checked for fastness before it ships.
- Lab dip approved before bulk
- Shade continuity across the lot
- Wash and rub fastness checked
The catalogue
Qualities peoplecome back for.
A cross-section of the range. Each one is a distinct construction with its own weight, hand and behaviour under dye.
01also rawView qualityGeorgetteDiamond Georgette
Fine grain, sharp fall
02View qualitySatinMalai Satin
Buttery, soft, rich
03also rawView qualitySheers & OrganzaNylon Organza
Crisp, sheer, springy
04also rawView qualityRayon & ModalRayon Slub
Soft, breathable, textured
05also rawView qualityCotton & LinenLinen
Dry hand, natural grain
06also rawView qualitySilk & Silk-LookDola Silk
Soft sheen, saree weight
07View qualitySlub & TextureCrunchy
Paper hand, real body
08also rawView qualityRayon & ModalModal Satin
Cool to the touch
How it runs
Eight stepsbetween yarnand your table.
Nothing here is unusual for a serious mill. What matters is that each step actually happens, in order, and that you can see where your order is.
Yarn and sourcing
Every quality starts with a yarn specification — denier, filament, twist. We buy to that spec rather than to whatever is cheapest that week, because it is the only way a repeat order looks like the first one.
- Denier and twist locked
- Approved spinners
- Lot traceability
Weaving and knitting
Cloth is produced to the construction sheet for that quality — picks, ends, width and weight. Looms are set once and monitored, so width and GSM hold across the length of the run.
- Construction sheet
- Width control
- GSM monitoring
Greige inspection
Loom-state fabric is checked on a light table for weave faults, oil marks and shading, then measured, folded and rolled. This is where a raw order is finished — and where a dyeing order is cleared to continue.
- 4-point style inspection
- Width and weight recorded
- Roll-wise tagging
Preparation
Before any colour goes on, the cloth is desized, scoured and heat-set. Skip this and the shade will not be level — most dyeing complaints are actually preparation complaints.
- Desizing
- Scouring
- Heat setting
Lab dip and approval
Send a swatch, a Pantone reference or a previous lot. We produce a lab dip against it, check it under the light source you sell in, and only start bulk once you have signed the dip off.
- Physical or Pantone match
- Multi-light assessment
- Written sign-off
What we do
Capabilities,stated plainly.
No claim here that we cannot show you evidence for.
- 01
Raw greige supply
Loom-state cloth in commercial quantities, inspected and documented, ready to enter your own process.
- 02
Piece dyeing
Reactive, disperse and acid dyeing across polyester, viscose, modal, cotton, nylon and blends.
- 03
Shade matching
Lab dips against a physical swatch, a Pantone reference or a lot you ran two seasons ago.
- 04
Finishing to brief
Hand feel set to what the garment needs — soft, dry, crisp — rather than to a single house finish.
- 05
Repeat programmes
Construction sheets and approved dips are kept on file so a repeat order matches the original.
- 06
Export documentation
Roll-wise packing lists, inspection reports and fastness results supplied with every dispatch.
Why buyers stay
The differenceis in the boringparts.
One mill, both states
Because the greige and the dyed goods come from the same production, the cloth you approve as a swatch is the cloth that arrives — not a similar construction from somewhere else.
Shade you can repeat
Approved lab dips and construction sheets stay on file. A repeat order six months later is matched against the original, not re-guessed.
Faults found here, not there
Inspection happens before dispatch, roll by roll, with the report in the box. Finding a fault at your cutting table is the expensive way to find it.
Straight answers on minimums
Dyeing has real minimums per shade per bath. We will tell you what they are for your quality and shade count instead of quoting a number that falls apart later.
Questions
Askedoften.
Raw fabric — also called greige or loom-state — is cloth as it comes off the loom: undyed, unprinted and unfinished. Dyed fabric has been prepared, coloured to an approved shade and finished, so it is ready to cut and sew. Buyers take raw when they run their own dyeing or printing; they take dyed when they want the shade delivered finished.
For most of the catalogue, yes. Thirty-three of our forty-one qualities are stocked in both states, and each fabric page tells you which states it is available in. A few qualities are supplied only as greige or only dyed — those are marked.
Send a physical swatch, a Pantone reference or a piece from a previous lot. We produce a lab dip against it and assess the match under more than one light source so it does not shift between your showroom and daylight. Bulk only starts once you approve the dip in writing.
It depends on the quality and whether you are buying raw or dyed, because dyeing has a practical minimum per shade per bath. Tell us the quality, the shade count and the total metreage and we will give you the honest minimum rather than a headline number.
Yes. Swatch sets of any qualities you are considering can be sent so you can judge hand feel, weight and drape yourself. Ask for the specific qualities, or tell us the end use and we will suggest a set.
Yes. Export orders are supplied with roll-wise packing lists, inspection reports and fastness results. Tell us the destination and the incoterms you work on and we will quote accordingly.
Greige is inspected on a light table for weave faults, oil marks and shading, and measured for width and weight. Dyed goods are additionally checked for shade against the approved dip, for shade continuity across the lot, and for wash and rub fastness before dispatch.
Start a conversation
Send us a shade and a quality.
Tell us what you are making, how much you need and whether you want it raw or dyed. You will get a straight answer on minimums, lead time and price.


